Mister Magnets® takes pride in supplying you with only high quality magnetic products that not only perform well, but stand the test of time and do it for years and years. As a result, we ensure that we only use the best materials and machinery at our disposal for the magnets you require.
On this page, we break down the materials and processes used on each of our products so that you can better understand why we choose the materials we do and so that you can know what to look for when shopping around and checking out competitor's specifications.
Fridge Magnets that are manufactured by Mister Magnets® have three components as seen below. The material is 0.6mm with a finished overall thickness of 0.7mm.
Fridge Magnet Material Mister Magnets® uses a 0.6mm thick commercial grade rubber-iron alloy with high magnesium content for a strong hold on fridges and filing cabinets that does not diminish over the years. It is flexible and returns to its flat shape even after being bent. It can withstand a maximum temperature of 80°C.
Fridge Magnet Printed Stock Mister Magnets® uses 170gsm art stock for printing artwork onto fridge magnets. This is then adhered to our magnetic material to make it stick. The thin art stock is great because it is less likely to peel off and ‘dog-ear' from the magnetic material. It is also lighter than thicker stocks, meaning your magnet can hold more on the fridge.
Fridge Magnets - CelloSheen Finish Mister Magnets® uses a clear cellosheen gloss finish to give the finished magnet a nice professional appearance while protecting the magnet from fading and getting dirty after years of being on someone's fridge.
Fridge Magnets Manufacturing Process Mister Magnets® uses a High Definition CMYK Digital Print Process to ensure excellent quality and full colour images and magnet designs as well as fast turnaround times. Operating costs are also relatively low on shorter runs allowing us to sell magnets in shorter runs without having to charge any nasty setup fees.
The print is adhered to the magnetic material and the cellosheen then seals all that advertising potential into each fridge magnet.
Magnetic Signs that are manufactured by Mister Magnets® have three components as seen below.
Magnetic Material for Signs & Car Door Magnets Mister Magnets® uses a thick 0.8mm commercial grade rubber-iron alloy with high magnesium content for a strong hold on outdoor surfaces and vehicles that will not lose any of its original strength even after years and years. Magnets made from this material can comfortably cling to most vehicles when travelling at speeds of up to 130 km/h.
Printed Vinyl for Signs & Car Door Magnets Mister Magnets® uses a 0.1mm absorbent vinyl that is specifically designed to retain colours printed onto it for longer. This ensures when used in combination with our UV inks that your design will retain its fresh and vibrant look for years to come, even when exposed to the hot Australian sun.
Laminate for Signs & Car Door Magnets Mister Magnets® have two kinds of laminating film available for selection.
The first is the standard matte laminate finish. This laminate is completely weatherproof and protects the artwork on your magnet from the rain and sun, helping to ensure that your artwork stays looking clean, fresh and professional even in extreme weather conditions.
The second is a dry erase finish. This laminate appears glossy however it is made to be written on with a whiteboard marker and is erasable. It is commonly used for whiteboards, menus and warehouse labels.
Manufacturing Process for Signs & Car Door Magnets The vinyl is has the artwork printed onto it using high grade UV protected inks that keep it from fading for years. The vinyl is then adhered to the magnetic material and the selected laminate is applied to the top of the vinyl.
The combination of UV inks and the protective vinyl are so effective that we actually offer a 5-Year No-Fade Guarantee on all of our Magnetic Signs.
FLYERS / MAILER CARDS
Flyers and Mailer Cards that are printed by Mister Magnets® have a few different options available for selection as seen below.
170gsm gloss art paper This stock is perfect for single or double sided flyers and are a cheaper alternative to thicker stocks.
250gsm gloss art board This stock is thicker and sturdier than the 170gsm stock. It can be printed on one or two sides and is a little cheaper than our 350gsm stock, making it an extremely popular option for tabbed or tipped flyers and mailer cards.
350gsm gloss art board This stock is even thicker and sturdier than the 250gsm stock. It is less likely to bend in the mail and is excellent when used for tipped mailer cards. It can be printed on one or two sides and has the option of having one side laminated for an extra glossy and protected finish.
CelloSheen Finish for Flyers & Mailer Cards Mister Magnets® has a clear cellosheen gloss finish as an available option for 350gsm mailer cards to give the finished design a nice glossy appearance while protecting the design.
Magnetic Tabs Mister Magnets® uses a 0.6mm thick self adhesive magnetic tab for use on tabbed flyers and mailer cards. They are also available for purchase for DIY tab sticking. They have dimensions of 20mm x 38mm and tend to be placed centered about 15mm from the top of a DL flyer.
Tipping Glue Mister Magnets® uses a soft glue for tipping fridge magnets onto flyers and mailer cards. This allows magnets to be stuck on for sending to clients via mail, where the consumer is easily able to peel the magnet away and keep for later.
Manufacturing Process for Flyers & Mailer Cards All of our flyers and mailer cards are printed using a High Definition CMYK Digital Print process, allowing extremely high quality and sharp images in addition to fast turnaround times and variable data customisation.
Tabbed Flyers going through a special high speed, high accuracy tabbing line machine to adhere the tab to the exact spot requested. Tipped Mailer Cards use a special gluing line machine that injects the perfect amount of hot glue onto the card to hold a fridge magnet until a customer is ready to peel it off.
We only use premium quality, commercial grade magnet for all orders.
Don't get fooled by ordering thin magnets bulked up with thick paper stock. You deserve to get what you pay for. Always ask the thickness of the actual magnet, not the overall thickness of the finished product. more >>
We're Australian owned and proudly make all of our fridge magnets here!
Magnets made in Australia undergo rigorous quality control processes and because they are made here, they arrive in days - not weeks or months. Spoil yourself and your customers with magnets that outshine any cheap, imported copies, all while supporting Australian industry and jobs. more >>
We'll always bend over backwards to ensure you are 100% happy. Guaranteed.
In the unlikely event that your order arrives damaged, goes missing, is defective or you receive the wrong product, we'll fix it to ensure you are 100% satisfied. No questions asked.
Custom size Fridge Magnet Finder
1. Enter Width (mm)
2. Enter Height (mm)
Exact pricing is based on quantity. Production times may vary for quantities over 10,000 units.
We'll custom make any shape you like in any size with free setup!
Whether it's a termite, a vampire, an alien or even your own logo, we'll die cut it.
Simply tell us your size to get an instant price!
1. Enter Width (mm)
2. Enter Height (mm)
Custom size Magnetic Sign Finder
1. Enter Width (mm)
2. Enter Height (mm)
Exact pricing is based on quantity. Production times may vary for quantities over 50 units.
Instant Quote Calculator
Creating Quote and Sending Email
Your quote has been sent
Magnetic Signs & Car Door Magnets
Select Cut Type
Select Paper Weight and Sides
Select Fridge Magnet Cut Type
Straight Edged (cheapest cut type)
Enter Fridge Magnet Size
mm (wide) x mm (high)
Found it cheaper? We'll refund the difference, even up to 30 days after your purchase!
Buy direct from the manufacturer and save - guaranteed lowest prices!
In order for a product to qualify for our price beat guarantee, the product must meet the following criteria:
SAME PRODUCT SPECS
The product must share the same specifications, including size, cut type and quantity.
The cheaper price must be available to anyone, including Mister Magnets and offer a similar turnaround time.
The cheaper price must be offered by an Australian company in Australia.
ALL EXTRA COSTS
The competitors price must include all delivery, artwork & setup costs.
Found it cheaper?
We'll refund the difference, even up to 30 days after your purchase!
Buy direct from the manufacturer and save. Guaranteed lowest prices!